Flame Detectors Parts
Didrikson Associates is an approved Channel Partner for Reuter-Stokes.
| RS PART NUMBER | DESCRIPTION |
|---|---|
| RS-FS-9001 | FLAME SENSOR (UV) – NA CLASS I DIV 2, ATEX ZONE 2 |
| RS-FS-9004 | FLAME SENSOR (UV) – NA CLASS I DIV 1, ATEX ZONE 1 |
| RS-FS-9006-MFR | FLAME SENSOR (UV) – AERODERIVATIVE (AS9100) |
| RS-FS-9009-03 | FTD 325 – CLASS I DIV 2, ATEX ZONE 2, NO COOLING REQUIRED, MAX TEMP 325°C |
| RS-FS-9010-03 | FTD 325 – CLASS I DIV 1, ATEX ZONE 1, NO COOLING REQUIRED, MAX TEMP 325°C |
| RS-FS-9009-03-25x | FTD 325 ILG – NO COOLING REQUIRED, MAX TEMP 325°C, INCREASED LOW GAIN FOR LOW INTENSITY LIGHT, CLASS I DIV 2, ATEX ZONE 2 |
| RS-FS-9010-03-25x | FTD 325 ILG – NO COOLING REQUIRED, MAX TEMP 325°C, INCREASED LOW GAIN FOR LOW INTENSITY LIGHT, CLASS I DIV 1, ATEX ZONE 1 |
| RS-FS-9100 | FLAME TRACKER LITE FOR INDUSTRIAL APPLICATIONS |
| RS-FS-9100-RELAY | RELAY, 1CH, D5254S |
| RS-FS-9101 | COIL COOLING WATER (GEPS #353B3490G001) |
| RS-FSM-1002-002 | FLAME SENSOR MODULE, MKV |
| SP-566 | COIL COOLING WATER (GEPS #353B3490G001) |
| RS-E2-0266G091 | KIT: (4) RS-FS-9009-03 / (4) RS-E2-0285P004 / MISC. HARDWARE |
| RS-E2-0266G092 | KIT: (4) RS-FS-9009-03 / (4) RS-E2-0285P004 / (1) RS-FSM-1002-002 / HARDWARE |
| RS-E2-0266G093 | KIT: RS-FS-9009-03 MOUNTING HARDWARE |
| RS-E2-0266G094 | KIT: (1) RS-FS-9100 / (1) RS-E2-0285P021 |
| RS-E2-0266G096 | KIT: (1) RS-FS-9100 / (1) RS-E2-0285P021 / (1) CASE / (1) RS STICKER (2) RS-FS-9009-03 / (2) RS-E2-0285P004 / (1) RS-FSM-1002-002 / |
| RS-E2-0266G097 | KIT: (1) RS-E1-0039-003 / HARDWARE |
| RS-E2-0266G098 | KIT: (2) RS-FS-9009-03 / (2) RS-E2-0285P004 / (1) RS-E1-0039-003 / HARDWARE |
| RS-E2-0266G099 | KIT: (8) RS-FS-9009-03 / (8) RS-E2-0285P004 / (2) RS-FSM-1002-002 / HARDWARE |
| RS-E2-0266G100 | KIT: (8) RS-FS-9009-03 / (8) RS-E2-0285P004 / HARDWARE |
| RS-E2-0285P001 | FLAME SENSOR CABLE: 60FT LONG / RIGHT ANGLE CONNECTOR |
| RS-E2-0285P004 | FLAME SENSOR CABLE: 120FT LONG / RIGHT ANGLE CONNECTOR |
| RS-E2-0285P011 | FLAME SENSOR CABLE: 60FT LONG / STRAIGHT CONNECTOR |
| RS-E2-0285P012 | FLAME SENSOR CABLE: 120FT LONG / STRAIGHT CONNECTOR |
| RS-E2-0285P021 | FLAME SENSOR CABLE: 15FT LONG / RIGHT ANGLE CONNECTOR |
Reuter-Stokes Cross Reference Matrix
| RS PART NUMBER | GE PART NUMBER | REPLACES PART NUMBER | DESCRIPTION |
|---|---|---|---|
| RS-FS-9001 | 362A1052P404 | 362A1052P001 362A1052P003 362A1052P004 362A1052P104 362A1052P203 362A1052P243 362A1052P303 362A1052P304 184X0254M029 RRO00148 |
FLAME SENSOR (UV) |
| RS-FS-9004 | 362A1052P105 362A1052P406 362A1052P407 |
362A1052P105 362A1052P106 362A1052P107 362A1052P306 362A1052P307 121T9685P0010 184X0254M123 RRO00149 |
FLAME SENSOR (UV) |
| RS-FS-9006-MFR | 362A1379P001 L44819P01 |
8TP10LMX J04937 RS-FS-9006 |
FLAME SENSOR (UV) – AERODERIVATIVE |
| RS-FS-9009-03 | 124T5712P0001 | RS-FS-9009-01 RRO00345 |
FTD 325 |
| RS-FS-9010-03 | 124T5712P0001 | RS-FS-9009-02 RRO00345 |
FTD 325 |
| RS-FS-9009-03-25x | 302T1201P0001 | RS-FS-9009-03 | FTD 325 ILG, ZONE 2 |
| RS-FS-9010-03-25x | 302T1201P0002 | RS-FS-9010-03 | FTD 325 ILG, ZONE 1 |
| SP-566 | 353B3490G001 | COIL COOLING WATER | |
| RS-E2-0285P001 | 362A1053P031 | CABLE: 60FT / RIGHT ANGLE | |
| RS-E2-0285P004 | 362A1053P036 | CABLE: 120FT / RIGHT ANGLE | |
| RS-E2-0285P011 | 362A3342P002 | CABLE: 60FT / STRAIGHT | |
| RS-E2-0285P012 | CABLE: 120FT / STRAIGHT | ||
| RS-E2-0285P021 | CABLE: 15FT / RIGHT ANGLE |
Didrikson Associates is an Authorized Distributor for Ontic / Honeywell Flame Sensors.
| Ontic / Honeywell PART NUMBER | Description – LG1093AA SENSORS |
|---|---|
| LG1093AA24 | FLAME SENSOR (UV) – 16 FT (4.9m) CABLE, CE Compliant, Orange |
| LG1093AA26 | LG1093AA26 FLAME SENSOR (UV) – 61 FT CABLE (18.6m), CE Compliant, Orange |
| LG1093AA36 | LG1093AA36 FLAME SENSOR (UV) – 61 FT CABLE, CENELEC IIA Compliant |
| LG1093AA44 | LG1093AA44 FLAME SENSOR (UV) – 16 FT (4.9m) CABLE, CENELAC IIC Compliant, ATEX Certified |
| LG1093AA45 | LG1093AA45 FLAME SENSOR (UV) – 42 FT (12.8m) CABLE, CENELAC IIC Compliant, ATEX Certified |
| LG1093AA46 | LG1093AA46 FLAME SENSOR (UV) – 61 FT CABLE (18.6m), CENELEC IIC Compliant |
| Mounting Interface | 3/4 inch internal NPT |
| Control Panel Connection | Teflon shielded cable with one inch external conduit thread |
| Operating Temperature | -40°F to +350°F |
| Window Pressure Rating | 150 psig at 400°F |
| Special Certifications | Explosion Proof Class I, Divisions 1 and 2, Groups B, C and D CE Mark: EMC Directive 2004/108/EC ATEX Directive 2014/34/EU II 2G Ex db IIA T3 or Ex db IIC T3 Models AA36/44/45/46 |
| Ontic / Honeywell PART NUMBER Description – LG1093AC SENSORS | Description – LG1093AC SENSORS |
|---|---|
| LG1093AC01 | FLAME SENSOR, Aero Derivative, Steel, 9 FT Cable |
| LG1093AC05 | FLAME SENSOR, Aero Derivative, Steel, 24 FT Cable |
| Mounting Interface | 1.73 inch O.D. by 0.14 inch wide flange |
| Control Panel Connection | Two conductor armored cable |
| Operating Temperature | -40°F to +350°F |
| Window Pressure Rating | 6.3 psig |
| Special Certifications | CE Mark: IECEx Class I, Div 2, Groups A, B, C, D T3 Class I, Zone 2 AEx nA IIC T3 Ex nA IIC Gc T3 |
| Cable Lengths | LG1093AC01: 9ft. (2.7m), LG1093AC05: 24ft. (7.3m) |
| Ontic / Honeywell PART NUMBER | Description – EG1033xx SENSORS | |
|---|---|---|
| EG1033AA01 | AMPLIFIER, FLAME (UV) | |
| EG1033AC01 | AMPLIFIER, FLAME (UV) | |
| EG1033AD01 | EG1033AD01 AMPLIFIER, FLAME (UV) | |
| Each amplifier will power two sensors, single or dual applications, and provide a separate output signal for each sensor. The EG1033AD model allows separation of the chassis ground shield connection from the input power low, distinguishing it from the EG1033AC. | ||
| EG1033AA | EG1033AC/AD | |
| Physical Dimensions | 6.62 x 4.25 x 2.32 inches | 6.62 x 4.25 x 4.44 inches |
| Mounting Holes | Four .20 in diameter holes, 6.00 x 2.00 inches apart | Four .20 in diameter holes, 6.00 x 2.00 inches apart |
| Amplifier Output | Transistor open collector | Relay Contacts |
| Flame Detect Time | Typical 0.1 sec; max 1.0 sec | Typical 0.1 sec; max 1.0 sec |
| Flame Loss Detect Time 0.2 sec max 0.2 sec max | 0.2 sec max | 0.2 sec max |
| CE Mark: EMC Directive 2004/108/EC LVD Directive 73/23/EEC |
Yes | Yes |
ONTIC / HONEYWELL CROSS REFERENCE
| HWY Part No. | GE Part No. | HWY Part No. GE Part No. Description Length (Feet) | Length (Feet) |
|---|---|---|---|
| LG1093AA24 | 261A1812P012 | Sensor, CE Compliant, Orange Cable | 16 |
| LG1093AA25 | NO LONGER PRODUCED; ORDER LG1093AA26 Sensor, CE Compliant, Orange Cable | 42 | |
| LG1093AA26 | 261A1812P013 | Sensor, CE Compliant, Orange Cable | 61 |
| LG1093AA34 | CENELAC IIA compliant, ATEX Certified, Orange Cable | 16 | |
| LG1093AA35 | NO LONGER PRODUCED, ORDER LG1093AA36 CENELAC IIA compliant, ATEX Certified, Orange Cable | 42 | |
| LG1093AA36 | 261A1812P014 | CENELAC IIA compliant, ATEX Certified, Orange Cable | 61 |
| LG1093AA44 | CENELAC IIC compliant, ATEX Certified, Orange Cable | 16 | |
| LG1093AA45 | CENELAC IIC compliant, ATEX Certified, Orange Cable | 42 | |
| LG1093AA46 | 261A1812P015 | CENELAC IIC compliant, ATEX Certified, Orange Cable | 61 |
| LG1093AB01 | L28490P01 | *NO LONGER PRODUCED; There is no drop in replacement for LG1093AB01/L28490P01. The customer would need to mod their equipment to add a mating connector. Contact us at sales@didrikson.com for additional details. | 0 |
| LG1093AC01 | 314A5030P001 | Sensor, Aero Derivative, Steel Cable | 9 |
| LG1093AC02 | L28490P02 | Sensor, Aero Derivative, Steel Cable | 9 |
| LG1093AC05 | L28490P05 | Sensor, Aero Derivative, Steel Cable | 24 |
| LG1093AA01 | OBOSOLETE. REPLACED BY LG1093AA24 and LG1093AA26 | ||
| LG1093AA04 | 261A1812P010 | NO LONGER PRODUCED (CADMIUM PLATED PARTS); ORDER LG1093AA24 | 16 |
| LG1093AA05 | 261A1812P009 | NO LONGER PRODUCED (CADMIUM PLATED PARTS); ORDER LG1093AA26 | 42 |
| LG1093AA06 | 261A1812P011 | NO LONGER PRODUCED (CADMIUM PLATED PARTS); ORDER LG1093AA26 | 61 |
| EG1033AA01 | 261A1812P002 | Amplifier – Current specific amplifier/1 internal CCA. | |
| EG1033AB01 | 277A2189P02 278A21815ZP1 |
Amplifier – NO LONGER PRODUCED, The best alternative is the EG1033AC01. This amplifier switch will require the customer to provide a 20-35 VDC power supply in place of the 117 VAC. The other interfaces should be similar. | |
| EG1033AB02 | 277A2189P08 | Amplifier – NO LONGER PRODUCED, The best alternative is the EG1033AC01. This amplifier switch will require the customer to provide a 20-35 VDC power supply in place of the 117 VAC. The other interfaces should be similar. | |
| EG1033AC01 | Amplifier – Handles wide range of currents/2 internal CCAs | ||
| EG1033AD01 | Amplifier, Grounded Shield – Handles wide range of currents/2 internal CCAs PLUS the ability to split signals (more functionality than AC01). |
* There is no drop in replacement for LG1093AB01/L28490P01. The customer would need to mod their equipment to add a mating connector. Contact us at sales@didrikson.com for additional details.
More about Ontic:
ONTIC SIGNS LICENSE AGREEMENT WITH HONEYWELL FOR INDUSTRIAL FLAME SENSOR PRODUCT LINES – August 24, 2021
Ontic has signed an exclusive license agreement with Honeywell for UV Flame Monitor System product lines currently manufactured at Honeywell’s facilities in Plymouth, MN and Clearwater, Florida.
Ontic, the aerospace industry’s leading provider of ‘Extended Life Solutions’ for Original Equipment Manufacturer (OEM) legacy products has signed an exclusive license agreement with Honeywell for UV Flame Monitor System product lines currently manufactured at Honeywell’s facilities in Plymouth, MN and Clearwater, Florida.
The UV Flame Monitor Systems are safety critical parts supporting GE power generation gas turbine engines for ground industrial and marine power derived from the CF-6 engine. This is the 39th agreement between the two companies adding products under exclusive license. The Honeywell-Ontic relationship began in 1983.
Gareth Hall, President and CEO of Ontic, said, “Ontic have become an integral support option for Honeywell’s product lifecycle and I am very pleased to sign another exclusive agreement with one of our key OEM partners.”
“Ontic has supported Honeywell through license agreements like this since the 1980s, and our exclusive license of the industrial flame sensor product line to Ontic extends this valued partnership,” said Matt Picchetti, Honeywell Aerospace VP/GM of the Navigation and Sensor Product Line.
The products will be transitioned to Ontic’s Creedmoor North Carolina facility.
Ontic’s global legacy focus is supported by manufacturing and MRO facilities in Chatsworth, California; Creedmoor, North Carolina; Plainview, New York; Cheltenham in the United Kingdom and in Singapore.
ABOUT ONTIC
over 47 years of aerospace product manufacturing and aftermarket support experience, Ontic provides FAA, CAAS, CAAC, TCCA, DCA, EASA Part 21 and 145 OEM support, including new and serviceable spares and repairs for over 7,000 mature aircraft parts. Ontic’s portfolio of products, licensed or acquired from major OEMs such as Honeywell, Collins Aerospace, Safran, Thales and GE Aviation, span all major aircraft.